Product Categories

 SIS – 1408 

These are overhead clean air modules mounted on roof or with steel frame on the ground. Units can be built with/ without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling/Dispensing of Raw Material. Basic Compounds, Active Compounds, works on the principal of laminar air flow with HEPA Filters & Pre-Filters.

 

Available in Wooden / M.S. Body duly powder coated/ Stainless steel body.

 

Specifications:-
 

Standard Size (Working Area) 2’×2’, 3’×3’, 4’×4’, 6’×6’, 8’×8’

Air velocity 90 ± 20 cfm (Average)

Filtration Elements Main Filters : HEPA Filter

Prefilter Washable non-woven polyester fibers

Filter Efficiency Main filter : 99.97 at 0.3 micron

Prefilter: Arrestance 90%, at 10 microns

Noise Level < 65 dBA

Light Intensity 800-1000 Lux

Power Supply 220V Single Phase, 50 Hz

 

SIS – 1392 
 

Heating block type temperature range from 5°C above and ambient to 150° C ± 1°C

Designed with glass reactions vessels and air condensers Supplied with stand to accommodate vessels Operate on 230 volts, 50 Hz, single phase

Available sizes at a time, for

15 samples

 

 

SIS – 1371  
 

Double walled, inner Chamber S.S. Outer M.S. Duly Powder Coated / S.S. PUF Insulated Temp. Range 5° C to 60°C. Cooling Compressor. Copper Cooling Coils Welded throughout on the Outside of the S.S. Chamber. Body Mounted on sturdy Angle lron Frame with caster wheels for easy Movability. Temp. is controlled by Digital Temp. Controller.
 

Provided with circulating Pump, with or without stirrer with S.S. Shaft. 
 

Working Size : 12”x12”x12”

Optional           : Outer Body S.S.
 

Microprocessor Based P.I.D. controller