Product Categories

SIS-1303
 

Temp. Controlled by Digital Temperature Controller Inner Stainles Steel.  Outer Body M.S. duly powder  coated / Stainless steel S.S. 304 

Temp range 5-50°C

CFC Free Compressor. 

Full view inner glass door. 

Lock & Key Arrangement. 

Caster wheel mounted cabinet. 

The  inner chamber is properly Insulated with special grade PUF to prevent 

Thermal losses. Air Circulating Fan for uniform temperature.
 

Size: 4 CU. Ft.  455 X 410 X 610 mm =  112 Ltr. 

Size: 6 CU. Ft.  505 X 415 X 830 mm =  170 Ltr. 

Size: 10 CU. Ft. 570 X 550 X 875 mm =  280 Ltr. 

Size: 12 CU. Ft. 650 X 580 X 900 mm =  336 Ltr. 

Size: 15 CU. Ft. 700 X 640 X 900 mm =  420 Ltr. 
 

OR ANY SPECIAL SIZE 

  

 

SIS – 1302

Temperature up to 70°C. Heating elements are placed in ribs at the bottom and sides. Double walled inside Stainless Steel. The door has synthetic rubber gasket. Outside Mild Steel painted in epoxy powder coating / stainless steel with perforated adjustable shelves, two indicators and on/off switch. To work on 220/230 volts A.C. 

With OR without one number Air circulating Fan & Digital

Temperature Controller Cum Indicator. 

Specially Designed to maintain 37°C temp. 

Size inside chamber 

W  X  D  X  H 

300 X 300 X 300 mm (12”X12”X12”) 1

355 X 355 X 355 mm (14”X14”X14”) 1

450 X 450 X 450 mm (18”X18”X18”) 2

450 X 450 X 600 mm (18”X18”X24”) 2

600 X 600 X 600 mm (24”X24”X24”) 3

600 X 600 X 900 mm (24”X24”X36”) 3
 

OR ANY SPECIAL SIZE. 
 

SIS-1314
 

Applications include isolation and identification of plant/human pathogens, work in virology, tissue culture, sterility testing and recombinant DNA research. This Biohazard Cabinet offers operator protection from low to moderate risk biological agents (or chemical carcinogens) while providing a sterile work environment for the procedure. The cabinet is kept under negative pressure with partial quantity of recirculated air exhausted through a HEPA filter. External exhaust from the laboratory is optional.
 

The Biological Safety Cabinet is similar in performance and specification to the vertical series, described on reserve.
 

The additional main features are as under:-
 

Specially suited for wet processing, water fab, chemical work, critical biological work involving virus and pathogens  for microbiology, biochemistry etc.
 

Standard S.S. table peripheral or fully perforated.
 

Integral powerful exhaust system. Built- in-positive Air curtain effect prevent inside air from going out and room air from entering in, providing total process and operator safety.
 

Exhaust ducting to carry the air outside.
 

Front sliding door, U.V. Light, Manometer, Gas cock etc. Optional.
 

AIR FLOW: 70% of the air is recirculated back into the work area and 30% of the air is HEPA filtered and exhausted out to the environment via a dedicated duct without mixing with the recirculated air.
 

Body:  (Wooden / Mild Steel Duly Powder Coated / S.S. 304)

WORKING SIZE:    2’x2’    3’x2’    4’x2’    6’x2’   

FACE VELOCITY: A face velocity of 90 ± 20 FPM is maintained.

OPTIONAL:

1.      H.E.P.A. Filter in Exhaust.

2.      Virus Burn out Unit in Exhaust.

3.      Magnahelic Guage in Place of Static Pressure Manometer.  


 

SIS – 1398 
 

These specially designed cabinets provide a wash of sterile filtered, clean air through HEPA filters having an efficiency of 99.97% down to 0.3 micron particle size. This cabinet protects dust and other particulates on Bottles and chemicals. For use in the laboratory for chemical storage. 

 

Self standing cabinet provides down flow clean Air in the cabinet. 

 

FEATURES 
 

Large interior capacity for handling various sizes Bottles / Chemicals. 

Wire Mesh Trays are Provided in the chamber so that all the air will be fully recalculated. Low power consumption suitable for operation on single phase supply. Inside Body is made of Stainless Steel & the outer Body is made of mild steel duly powder coated. 

 

Working Area Size:

(L X B X H)

2’x2’x2’ 2’x2’x3’ 2’x2’x4’ 2’x2’x6’

3’x2’x2’ 3’x2’x3’ 3’x2’x4’ 3’x2’x6’