Product Categories

SIS – 1384 
 

These are overhead clean air modules mounted with Stainless steel frame on the ground. Units can be built with/ without casters so the clean enclosure can be moved over equipment or used to isolate a controlled process. It is basically used for filling, refilling weighing and sampling / Dispensing of Raw Material, Basic Compounds, Active Compounds. It works on the principal of Laminar Air Flow with HEPA Filters & Pre-Filters.
 

This will act as a CLASS 100 Room. Protection of the personal in the cabinet from the processed substances by vertical flow with Reverse Flow of clean air protection of the raw and intermediate products to be processed. Protection of the room where the cabinet is built up and environment from highly active substance which otherwise would disperese in the room and escape in the atmosphere unfiltered. Safe collection and deposition of substance released during work.
 

• Wooden/M.S. Powder Coated / STAINLESS STEEL BODY (304) 

• HEPA Filter (0.3 micron)

• Fine Filter (5 micron)

• Pre-Filter  (10 micron)

• Motor Blower Assembly

• U.V. Light

• Fluorescent Lamp

• Operatating Switch

• Static Pressure Manometer

• Stainless Steel Standing Base

• High Quality HEPA filter provides protection for the product (filtration efficiency of more than 99.97% at 0.3 micron.

• Ultra-quiet noise level of not more than 65 dBA.

• Durable and easy to clean stainless steel body.

• Work area properly illuminated by diffused glare free fluorescent light.

• PVC Flexible Curtains on all the three sides.

SPECIFICATIONS:

Air Velocity 90 ± 20 cfm (Average)

Filteration Elements Main Filters : HEPA Filter

Prefilter Washable non-woven polyester fibers.

Filter Efficiency Main Filters : 99.97 at 0.3 micron

Prefilter Arrestance 91% at 10 microns

Fine Filter 10 micron

Noise Level <65 dBA

Light Intensity 800-1000Lux

Power Supply 220V Single Phase, 50 Hz.
 

WORKING SIZE

WxDXH 

2’×2’×6’

3’×2’×6’ 

3’×3’×6’

4’×2’×6’

4’×3’×6’

4’×4’×6’

6’×2’×6’

6’×4’×6’

6’×6’×6’

 

SIS – 1390 
 

(ALL THE SPECIFICATIONS ARE AS PER SINGLE CHAMBER)

 

NOTE: OUTER STAINLESS STEEL MODEL IS ALSO AVAILABLE

 

SIS – 1389 

Most suitable for conducting various experiments on a variety of seeds under different conditions of temperature and humidity.
 

Atmospheric conditions are created within the chamber.
 

Double walled unit Inner chamber made of Stainless Steel and outer chamber of M.S. sheet duly painted.
 

Temperature from 5°C to 50°C ± 1°C is controlled by Digital Temperature controller-cum-Indicator. Humidity is created in a S.S. water reservoir fitted at the bottom to provide 90% to 95% ± 3% RH Humidity. Supplied complete with 12-14 adjustable wiremesh trays with Exterior lighting arrangement on both sides.
 

Complete with cord and plug to work on 220/230 volts A.C. Supply.

 

(W×D×H)

600×600×900 (24”×24”×36”)

 

A) Automatic Cyclic Timer (0-24 hours)

B) Dual Setting Digital Temperature Controller for setting two different temperatures for day and night.

C) Automatic voltage Stabilizer 3KVA.