Product Categories

SIS – 1365  
 

The motor stirrer having maximum speed upto 4000 RPM unit is clamped to a Chrome plated rod fitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed motor with speed regulator is fitted with S.S. Stirrer rod to give smooth and Noiseless operation. Available with or without Drill-Chuck. 

1/20 H.P.  stirrer 1/8 H.P.  stirrer 1/4 H.P.  stirrer 1/2 H.P.  stirrer 

OR  ANY OTHER CAPACITY ON REQUEST 

OPTIONAL : Digital RPM Indicator

 

SIS – 1323 
 

(General Purpose for R & D Laboratories)

And also used for determination of Insolubility Index for Dairy Milk Products.
 

Easy lid lock, Speed regulator, safety Fuse, Elegant front panel.

With a wide choice of rotor heads and adaptors this unit is truly versatile.

Digital Speed Meter and Digital Timer.
 

Max. Speed : 4000 OR 5000 RPM

NOTE: Centrifuges with different speed ranges and cooling models and or with different rotors also available on request.

 

SIS – 1405 
 

Lab Jacks are designed to support and adjust the height of a variety of laboratory apparatus such as hot plates, baths, and glassware, not for lifting loads.
 

Available Size:

15×20 cm

20×20 cm

 

SIS-1313
 

With all accessories which are:
 

Working table of S.S 304
 

HEPA of 0.3 micron of an efficiency of 99.97% down to 0.3 Micron 
 

Media is of glass fiber made of pleats back & fro in an anodized aluminum frame 

(With Test Report)
 

Pre filter of dry fiber washable type with the frame of on all the sides 
 

Confirm the international standard 209 E.
 

Statically Balanced motor blower Assembly (Heavy Duty) 
 

Velocity at the out put of Hepa is 90 ± 20 FPM 
 

Noise level is very low
 

Vibration is also very low 
 

Normal working fluorescent light
 

Static pressure Manometer 
 

U.V. Light 
 

The body is made of laminated board duly satin finished wherever necessary/ M.S. Duly Powder coated / S.S. Body. 
 

Front & Side  door of acrylic sheet (Transparent)
 

Gas cock 
 

Working Size;

2’x2’x2’

  3’x2’x2’

4’x2’x2’

6’x2’x2’

8’x2’x2’
 

OR ANY NON STANDARD SIZE. 
 

1. Magnahelic Guage in place of Static Pressure Manometer. 

2. U.V. Resistant Polycarbonate sheet in place of acylic sheet. 

3. Imported MINIPLEAT Filter in Place of normal HEPA Filter

 

 

WOODED BODY

OR 

MILD STEEL DULY POWER COATED 

OR 

STAINLESS STEEL (304)