SIS-1313
With all accessories which are:
Working table of S.S 304
HEPA of 0.3 micron of an efficiency of 99.97% down to 0.3 Micron
Media is of glass fiber made of pleats back & fro in an anodized aluminum frame
(With Test Report)
Pre filter of dry fiber washable type with the frame of on all the sides
Confirm the international standard 209 E.
Statically Balanced motor blower Assembly (Heavy Duty)
Velocity at the out put of Hepa is 90 ± 20 FPM
Noise level is very low
Vibration is also very low
Normal working fluorescent light
Static pressure Manometer
U.V. Light
The body is made of laminated board duly satin finished wherever necessary/ M.S. Duly Powder coated / S.S. Body.
Front & Side door of acrylic sheet (Transparent)
Gas cock
Working Size;
2’x2’x2’
3’x2’x2’
4’x2’x2’
6’x2’x2’
8’x2’x2’
OR ANY NON STANDARD SIZE.
OPTIONAL:
1. Magnahelic Guage in place of Static Pressure Manometer.
2. U.V. Resistant Polycarbonate sheet in place of acylic sheet.
3. Imported MINIPLEAT Filter in Place of normal HEPA Filter
Material of construction:
WOODED BODY
OR
MILD STEEL DULY POWER COATED
OR
STAINLESS STEEL (304)
| 
